Zirconia Blocks
Ultra-high bending strength and hardness
Comprehensive indications, especially for the long span bridge.
The excellent masking effect can be used for covering the metal color.
Bloomden white zirconia is unlike any other zirconia, it can exhibit a strength up to 1200MPa which can cover posteriors and anteriors for both crowns and bridges including implant restorations.
Bloomden zirconia is tension-free sintering without distortionand high accuracy of fit. High accuracy of fit, even for wide-span restorations
We provide exceptional color matching for VITA@'s full range of 16 shades, including BL2. Our quality is consistent across batches, and dental technicians in both Europe and the USA have confirmed our color accuracy.
Restorations are available with monolithic full contour crowns, bridges, veneers or full arch.
Veneer
Anterior Crown
Posterior Crown
Inlay
Full Crown Bridge
Impant Crown
Implant Full Arch
Full Arch Bridge
| Technical SpecincationsTechnical Specincations | ||||
| UT | HT-PLUS | ST | SHT | |
| ZrO2+Hf02+Y203ZrO2+Hf02+Y203 | ≥99% | ≥99% | ≥99% | ≥99% |
| Y203Y203 | 9%-10% | 4.5%-6.0% | 4.5%-6.0% | 7.0%-7.8% |
| AI203AI203 | <0.05% | <0.15% | <0.15% | <0.15% |
| Density beforesintering(g.cm-3)Density beforesintering(g.cm-3) | 3.20±0.05 | 3.15±0.05 | 3.15±0.05 | 3.15±0.05 |
| Density aftersintering(g.cm-3)Density aftersintering(g.cm-3) | 6.06±0.01 | 6.09±0.01 | 6.09±0.01 | 6.08±0.01 |
| CTE(25-500℃C)(K-1)CTE(25-500℃C)(K-1) | 10.5±0.5 | 10.5±0.5 | 10.5±0.5 | 10.5±0.5 |
| Flexural strengthafter sintering (MPa)Flexural strengthafter sintering (MPa) | >600 | >1350 | >1200 | >1000 |
| Aging surfacemonoclinic phasecontentAging surfacemonoclinic phasecontent | <15% | <15% | <15% | <15%< |
| Light transmittanceLight transmittance | <49% | <37% | 41%-43% | <46% |
| Chemical solubilityafter sintering(ug.cm-2)Chemical solubilityafter sintering(ug.cm-2) | <100 | <100 | <100 | <100 |
| CytotoxicityCytotoxicity | 0 Level | 0 Level | 0 Level | 0 Level |
| Radioactivity(Bq.g-1)Radioactivity(Bq.g-1) | <0.1 | <0.1 | <0.1 | <0.1 |
| Sinteringtemperature(℃℃)Sinteringtemperature(℃℃) | 1450 | 1530 | 1530 | 1530 |
| SystemsSystems | 98mm/95mm/92*75mm98mm/95mm/92*75mm | |||
| ThicknessThickness | 12m/14mm/16mm/18mm/20mm/22mm/25mm | |||
| ShadesShades | A1 A2 A3 A3.5 A4/B1 B2 B3 B4/C1 C2 C3 C4/D2 D3 D4 | |||
I have been using zirconia fast sintering technology for several months now, and I am thrilled with the results. The fast sintering process has significantly reduced the time it takes to produce high-quality zirconia restorations, allowing me to take on more work and increase my productivity. The strength and aesthetics of the restorations are just as good, if not better, than traditional sintering methods, and my patients have been extremely satisfied with the results. I appreciate the reduced energy consumption , which makes the process more environmentally friendly.
Overall, zirconia fast sintering technology has been a game-changer for my lab, and I would highly recommend it to any dental technician looking to improve their workflow and output quality.
Dr.Nathan Graves
